Solenoid Valve

Solenoid valves are widely used in the industry for fluid control, but choosing the right valve requires consideration of several things that the equipment seller may consider but you have not thought about. By categorizing these items below, you can see the items that should be considered when ordering a solenoid valve.

Types of solenoid valves in terms of performance can be classified into the following types, each of which has its own characteristics

For example, valve with direct operation of Direct-operated solenoid valves or valve as pilot Pilot-operated solenoid valves and ...

Forced-lift solenoid valves , Servo-assisted solenoid valves , Direct-acting solenoid valves , Latching solenoid valves , Proportional solenoid valves , Air-operated solenoid valves , Motorised solenoid valves

NAMUR solenoid Valves , Miniature solenoid Valves

In terms of the type of fluid that can be air, oil or fuel, natural gas, water or steam and corrosion of chemicals

Air, Oil and Fuel , Gas and Natural Gas , Water, Hot Water and Steam , Cryogenic fluids & Corrosive chemicals , Dust

Solenoid valve in terms of connection type:

BSP , NPT , NSI , DIN , Threaded , Flanged , Welded

Considering static pressure tolerance

Solenoid valve in terms of number of ports and how to connect for example the following types:

2/2 solenoid valve 3/2 solenoid valve 4/2 solenoid valve 5/2 solenoid valve 5/3 solenoid valve

In terms of being open or closed in normal mode

Normally Open (NO) Normally Closed (NC) Universal (U)

Body material that can be brass or steel or aluminum or iron, etc.:

Brass Stainless Steel Aluminium Cast Iron Cast Steel PVC Teflon Gunmetal Plastic

Valve standards and approvals for explosive environments:

Explosion proof to ATEX, NEMA, EExd & EExi Intrinsically safe solenoid valves

In terms of fluid passage and diameter of the orifice, as well as the type and type of seal for Gas WRAS for Water Solenoid Valves elastomers / seals: Nitrile Viton EPDM PTFE NBR Silicone Neoprene