Standard Type Paddle switch

The blade switch or rotor is suitable for powdered and granular solids and is suitable for monitoring the full and empty condition of hoppers, silos and tanks, and is designed to determine the minimum or maximum height of granular solids with high adhesion in tanks. The device is installed horizontally from the side of the tank. The impeller installed on the device starts to rotate slowly when it does not collide with the material. As the material rises and reaches the impeller, the impeller and shaft stop, causing the motor shaft to start rotating. This rotation first activates the signal switch and then activates the motor power switch. If the material comes down and the impeller is released, the shell returns to normal and the impeller begins to rotate. To adjust the sensitivity of the device, the spring tension must be adjusted according to the mass of the material.

applications :

• Granules of plastic and synthetic materials
• Chemicals and fertilizers
• Pharmacology
• Food and beverage
• Agriculture
• Cement as well as ceramics
• Powerhouse
• Casting industry

•  
• Flange and gear installation vertically
•  Suitable for materials with a specific gravity of 0.7 kg / dm3
• Adjustable sensitivity
• SPDT output
• IP 54 Weight 2.2 Kg
• Tank temperature minus 20 to 80 degrees Celsius
• Operating temperature of the device (ambient temperature) 20 to 70 degrees
• Can be used in a wide range of powdered materials, even coarse-grained materials of food industry, cement industry, detergent feed